Motorola Solutions TALKABOUT T21 Serie Guia Del Usuario página 14

English
Note: Setting the call tone to OFF disables the call tone
feature.
3. To set the new call tone and exit Menu, press the PTT button.
You can continue the set-up by pressing the Menu/Lock button.
4. To transmit your call tone to other radios with the same channel and
Interference Eliminator Code, press the Call Tone button.
Configuring the iVOX or VOX
With the Internal Voice Operated Transmission (iVOX) or Voice
Operated Transmission (VOX), you can begin transmission by speaking
into the microphone of the radio or audio accessory instead of pressing
the PTT button.
Table 2: Transmission Sensitivity
Classification Description
L3 High Sensitivity for quiet environments.
L2 Medium Sensitivity for most environ-
ments.
L1 Low Sensitivity for noisy environments.
1. Press the Menu/Lock button until the radio displays iVOX icon.
The radio displays VOX icon when an audio accessory is connected.
The current setting (Off, L1–L3) blinks.
2. To select the sensitivity level, press the + or - button.
3. To exit menu, press the PTT button.
You can continue the set-up by pressing the Menu/Lock button.
Note: Using the iVOX or VOX causes a short delay in
transmission.
12
Setting the Dual Watch Mode
The Dual Watch mode enables you to scan the current channel and
another channel alternately.
1. Press the Menu/Lock button until the Dual Watch icon blinks.
The current call setting blinks.
2. To select the channel, press the + or - button. Then press the Menu/
Lock button.
3. To select the code, press the + or - button.
4. To activate Dual Watch, press the PTT button or wait until time out.
The screen alternates between the Home Channel and Dual Watch
Channel.
5. To end Dual Watch mode, press the Menu/Lock button.
Note: If you set the same channel and code as the current
channel, the Dual Watch Mode is not enabled.
Setting the Keypad Tones
You can enable or disable the speaker key tones. You hear the key tone
each time you push a button.
1. Press the Menu/Lock button until the radio displays Keypad Tone
icon.
The current on/off setting blinks.
2. To turn on or off keypad tones, press the + or - button.
3. To confirm and exit menu, press the PTT button
You can continue the set-up by pressing the Menu/Lock button.
Note: The following features are not disabled when the
keypad tone feature is turned off:
• Transmit timeout alert tone
• Call tone
• Low battery alert tone
• The transmitted talk confirmation tone