ICEFOX A1 Manual De Usuario página 8

Electronic control operation instructions
Before using the walking pad treadmill
mains socket. Turn on the power switch(red). Enter manual mode: After the electronic power meter-
wide display, enter the initial standby mode.!
!
Function manual
1.
The appearance of the electronic meter is shown in the figure!
!
2. Start up
Start normally after a 3-second countdown.
3.Safety key function
When the safety key is removed, it will display "E07" and the walking pad treadmill will
stop quickly, and the alarm will sound. After put the safety key back the electronic meter
full display 2 seconds ,all data clear.
4.Remote control/Keypad key function
4.1 Start/Stop key:
Start button, when the walking pad treadmill is stopped, press the start-stop button, the speed displays
"0.5", and the walking pad machine starts.Stop button, in the running state of the walking pad treadmill,
press the start and stop button, all data will be cleared, the walking pad machine will return to manual
mode after it stops steadily, and the walking pad treadmill will stop.
4.2 Speed plus and minus keys:
It can be used to adjust the setting value when setting parameters for the treadmill. Once the
treadmill is started, it can be used to adjust the speed in steps of 0.1/time, automatically and
continuously incrementing by 0.5 or decrementing by 0.5 when held down for more than 2 seconds.
5.Display function
5.1 "Speed" speed window:
Display the current speed value in the running state,
5.2 "Time" time window:
Display the exercise time,at the start of the countdown, "3", "2", "1" are displayed.
5.3 "Distance" distance window:
Displays the distance accumulation in manual and program modes or the distance countdown in
mode operation.
5.4 "Calories" calorie window:
Displays calorie accumulation while exercising in manual and program modes or running calorie
counts in mode.
>
.Ensure that the power lead is plugged into a suitable, live,
!!!!!!!!!!!!!!!!!!!!!!!!!!!!Power switch!
!