Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
INSTRUCTIONS AND WARNINGS FOR SERVICING
NOTE
: Carefully read the hazards
mentioned in section "Hazards and safety
provisions during servicing" of the "user in-
struction manual".
Keep the appliance at peak effi ciency by car-
rying out the scheduled servicing procedures
recommended by the manufacturer. Proper
servicing will ensure the best performance, a
longer working life and constant maintenance
of safety requirements.
WARNING
: Before carrying out any
servicing procedure, activate all the safety
devices provided and decide whether staff
at work and those in the vicinity should be
informed.
See section "TROUBLESHOOTING" of the user
instructions manual.
HANDLING AND INSTALLATION
INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION
NOTE
: Read the following sections
carefully before performing any handling
and installation operations; read the
following sections of the "User instruction
manual":
WARNING
:
stallation operations should be carried out
in accordance with current legislation on
health and safety at work.
6
SERVICING
FAULT
TROUBLESHOOTING
All handling and in-
In particular, turn off the electricity supply
using the circuit-breaker and prevent access
to all devices which might people's health
and safety at risk if activated.
Also make sure that during the maintenance
procedure, that the operator is always able
to check whether the plug is disconnected
from the power outlet.
Every 100 working hours have skilled, author-
ised personnel carry out the following opera-
tions.
– Check that the safety thermostat is working
correctly.
– Check that the electrical system is in good
working order.
If necessary, the person authorised to carry
out these operations must organise a "safe-
ty plan" to protect the people directly in-
volved.
WARNING
: The required connec-
tions (water, electricity, and gas) must be set
up exclusively by suitably qualifi ed staff , in
accordance with local requirements.
SERVICING
3320021_inst_GB
Publicidad
