Angelo Po 0N0PE4 Manual De Uso página 40

ENGLISH
If the appliance is to be out of use for a lengthy
period, proceed as follows.
Cut off the mains electricity supply using the
)
appliance's master switch.
Clean the appliance and the surrounding
)
areas thoroughly.
INSTRUCTIONS AND WARNINGS FOR SERVICING
NOTE: Carefully read the hazards
mentioned in section "Hazards and safety
provisions during servicing" on page 9.
Keep the appliance at peak effi ciency by car-
rying out the scheduled servicing procedures
recommended by the manufacturer. Proper
servicing will allow the best performance, a
longer working life and constant maintenance
of safety requirements.
WARNING: Before carrying out any
servicing procedure, activate all the safety
devices provided and decide whether staff
at work and those in the vicinity should be
informed.
In particular, turn off the electricity sup-
ply using the circuit-breaker and prevent
access to all devices which might people's
health and safety at risk if activated.
18
LENGTHY DOWNTIMES OF APPLIANCE
SERVICING
Spread a fi lm of edible oil over the stainless
)
steel surfaces.
Carry out all the servicing procedures.
)
Cover the appliance and leave a few gaps to
)
allow air to circulate.
Also make sure that during the maintenance
procedure, that the operator is always able
to check whether the plug is disconnected
from the power outlet.
At the end of each session of use and when-
ever necessary, clean:
– The plate (see page 20) .
– The accessories .
– The appliance and the surrounding environ-
ment (see page 19).
Every 100 working hours have skilled, author-
ised personnel carry out the following opera-
tions.
– Check that the safety thermostat is working
correctly.
– Check that the electrical system is in good
working order.
SERVICING
3320021_ut_GB