Tivoli Audio SongBook Manual Del Usuario página 7

Prior to pairing, verify your smart device is not connected to any other Bluetooth product. Devices may pair differently.
Below is a general guide.
1. Turn the SongBook to the "BT" position. The SongBook should automatically enter pairing mode, indicated by a
blinking blue LED. To start pairing mode, press the pairing button located on the rear panel.
2. Go to the Bluetooth settings screen on your phone or tablet.
3. Select the device that has a name similar to "SongBook_XXXXX".
4. Once you hear the Bluetooth connection tone, you are paired to the SongBook.
The SongBook can be used as a standalone speaker. Use the ¼" (6.35mm) auxiliary input to attach any line, headphone
level or high impedance source into your speaker. You can control the volume of the speaker using the volume control on
the SongBook or with the volume control of your audio source. Your device may require the use of a 1/4" to 1/8"
(6.35mm to 3.5mm) adapter.
AMP / LINE Toggle Switch
This toggle switch controls the onboard preamp, allowing you to connect a variety of inputs.
LINE: Set the switch to Line when plugging in a line or headphone level source. This setting turns the onboard preamp
OFF, and is for use with inputs that do not require additional amplification.
Use this setting when connecting an MP3 player, record player, keyboard or other line-level inputs.
AMP: Set the switch to Amp when plugging in a guitar, bass or other instruments requiring a high impedance input. This
setting turns the onboard preamp ON, and is for use with instruments or other inputs that require additional
amplification.
Use this setting when connecting instruments or other inputs requiring a high impedance input.
AMP IT UP
With the switch set to AMP, the AUX IN Input is active in Bluetooth Mode. Use this feature for home practice, or open
mic nights! Play a track on Bluetooth and play along using the AMP input.
CAUTION:
Always turn the volume down to 0 before plugging in or unplugging your aux input.
If you are unsure which setting to use:
•
First set the toggle to LINE
•
If you need more volume: set the toggle to AMP
•
Take care not to set the toggle switch to AMP when connecting a line level source. The additional input volume may
cause damage to the SongBook's speakers.
Use the sliders to tailor the sound to your liking. Adjust the Lo, Mid and Hi frequency ranges - each slider ranges from -6
dB to +6dB. The points on the front panel by the slider correspond with +/- 2, 4, 6 dB.
English
Bluetooth Operation
Auxiliary Operation
EQ Section
6