SOMFY Sunea 40 RTS Instrucciones página 16

EN
3.3.Favourite position (my)
NOTICE
An intermediate position, which is called the "favourite (my) position" and is different from the upper and lower
positions, can be programmed.
3.3.1.Programming or modifying the favourite position (my)
1] Place the motorised product in the desired favourite position (my).
2] Press the my button for ≈ 5 s until the motorised product moves up and
down:
g The desired favourite position (my) is programmed.
3.3.2.Using the favourite position (my)
Briefly press my: the motorised product starts to move, and stops in the favourite
position (my).
3.3.3.Deleting the favourite position (my)
1] Press my:
ð The motorised product starts to move, and stops in the favourite position
(my).
2] Press my again until the motorised product moves up and down:
g The favourite position (my) is deleted.
3.4.Operation with sensors
Refer to the corresponding instructions.
3.5.Tips and advice on operation
3.5.1.Questions about the product?
Observations
The motorised product does not
operate.
NOTICE
If the motorised product still does not work, contact a drive and home automation professional.
3.5.2.Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a drive and home automation professional.
4.TECHNICAL DATA
Frequency bands and maximum power used
16
Possible causes
The control point battery is low.
The battery level is low, or the battery is
discharged.
433.050 MHz - 434.790 MHz e.r.p. <10 mW
1]
2]
1]
2]
Solutions
Change control point battery as
required.
Refer to the battery instructions guide.
©
Copyright 2023 SOMFY ACTIVITES SA. All rights reserved.
Sunea 40 RTS DC