Publicidad
Idiomas disponibles
Idiomas disponibles
- Many sparks and splashes are thrown from the cutting arc, therefore use oil-free protective clothing
such as leather gloves, thick shirts and pants, protective shoes and head protection. Wear hearing
protection when cutting in con ned spaces.
- Connect the work cable as close as possible to the cutting area.
1.6. Electric and magnetic eld
Electric current owing through any conductor causes localized electric and magnetic elds and the
discussion about the e ect of these elds is a worldwide topic. So far, there is no evidence that these
elds can have health e ects, however, research results so exposure should be minimized to the
minimum possible.
To minimize it, the following procedures should be followed:
- Secure appliances with cords and secure with waterproof tape where possible.
- The cables must be as far as possible from the operator.
- Do not wrap the power cord around your body.
- Make sure that the machine and the power cable are as far as possible from the operator as long as
circumstances allow.
- Connect the ground cable as close as possible to the welding area.
- People with pacemakers should be as far as possible from the welding arc.
2. GENERAL INFORMATION
MIG SERIES arc welding machine adopts the latest pulse width modulation (PWM) technology and
insulated gate bipolar transistor (IGBT) power module, which can change work frequency to medium
frequency so as to replace the traditional hulking work frequency transformer with the cabinet
medium frequency transformer. Thus, it is characterized with portable, small size, light weight, low
consumption and etc.
MIG SERIES arc welding machine uses Mix gas as shielded gas to realize gas shielded welding, active
gas （ Ar+O2、 Ar+CO2） as shielded gas to realize MAG welding and inactive gas （ Ar） as shielded gas to
realize MIG welding.
MIG SERIES arc welding machine has automatic protection functions with intelligent to over-voltage,
over-current and over-heat. If any one of the above problems happens, the alarm lamp on the front
panel will be lighted and output current will be shut o automatically to protect itself and prolong the
equipment using life.
MIG SERIES Features:
1. Digital control system, real-time display the welding parameters.
2. High performance multifunction power source (MIG/MAG).
3. Waveform control, stable welding arc.
4. IGBT technology, low power dissipation.
MIG SERIES arc welding machine is suitable for all positions welding for various plates made of
stainless steel, carbon steel, alloyed steel etc, which is also applied to pipe installment, mould mend,
petrochemical, architecture decoration, car repair, bicycle, handicraft and common manufacture.
MAG--Metal Active Gas Welding / MIG--Metal Insert Gas Welding
04
SWEISSWELD.COM
Publicidad
