Publicidad
Idiomas disponibles
Idiomas disponibles
3.5. TIG
For the TIG process, the shielding gas is connected to the torch directly and the Lift method is used.
SKYWORKS
TIG torch
Gas
Worpiece
TIG arc start ： when the tungsten electrode touches the workpiece, the circuit current is only 10A. After
generating the arc, the welding current rises to the predetermined value. If the tungsten touches the
workpiece while welding, the current drops to 10A in 2 seconds, which can reduce the deterioration of
the electrode, extending the life of the tungsten.
3.6. MIG / MAG
The negative pole must be connected to the work piece. The gas must be connected to the valve
located on the back of the equipment. Before connecting the torch verify that all consumables are set,
then proceed to connect the torch and load the wire. Please note that the diameter of the wire must
be in accordance with the roller and the tip of the torch.
SKYWORKS
MIG torch
Gas
Workpiece
10
SWEISSWELD.COM
Publicidad
