Adjusting cutting height
Pull the height adjustment knob out and
move it to the required angle. Check that the
knob engages in one of the 5 positions from
25 to 75 mm cutting height.
Changing to side discharge
With the side discharge, cut grass is ejected
out onto the lawn to the right of the
lawnmower. The side discharge is useful if
the grass is so long or wet that the mulch
function cannot pulverise the grass correctly.
In order to change the discharge setting
from mulch to side discharge, open the lock
mechanism (19) and lift the spring-loaded
� ap on the side of the lawnmower's skirt (12)
and hold it open.
46
bu
Fit the side discharge (15) in the opening and
then lower the spring-loaded � ap over the
tabs on the side discharge so that it is held
in place.