Troubleshooting - Beem Omni Perfect Manual De Instrucciones

Omni Perfect
The following table will help you locate and eliminate minor faults:
fault
Pressure is not built up.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
36

Troubleshooting

Possible cause
Safety valve is stuck.
Sealing ring not correctly
inserted.
Regulating valve set to
The lid is not fitted properly
fitted.
Not enough liquid filled.
Sealing ring worn.
Remedy
Clean the
safety valve.
Insert the sealing
ring correctly.
Set the regulating valve
.
to either level I, II or III.
Fit and lock the lid
properly.
Fill the pot with
at least 1 litre of liquid.
Replace the
sealing ring.
BEEM - Elements of Lifestyle
EN