Publicidad
Idiomas disponibles
Idiomas disponibles
EN-10
4.4 Zero Operation
Center of Zero is indicated by the
Press ZERO to zero the weight dis-
play.
"CEntr" will be displayed momentarily
before the display is zeroed.
4.5 Sampling, Calculating Average Piece Weight (APW)
Place the desired sample onto the
weighing pan (or into a tared con-
tainer) (ex. 3000g).
Press SAMPLE. "SAmP" will be dis-
played momentarily before the calcu-
lated APW is confirmed (based on the
last sample size entered or ex-factory
default 10 if used for the first time).
Or, enter a new sample size (ex. 50)
via the numeric keypad before press-
ing SAMPLE.
Notes:
The larger the sample size, the more accurate the APW.
The sample size entered is retained even after the unit is turned off.
Unless stored into memory (refer to Sec.4.7 ), Piece Weight values are not
retained when the unit is turned off.
4.6 Entering a Known Piece Weight
Enter the value of a known piece
weight via the numeric keypad
(ex. 40g/pc.), then press APW (with
a weight on the pan, the piece count
is automatically calculated and dis-
played).
Notes:
To clear the Piece Weight value, press C.
"Wt. Lo" annunciator will turn on if the total sample weight is less than 10
display divisions. Add more samples for a more accurate or stable reading.
"APW Lo" annunciator will turn on if the APW value is less than 1/10th display
divisions. Increase the piece weight value for more accurate results.
Initate entry of decimal values with a "0". For example. 0.5g is entered as "0" "." "5".
Ranger Count 1000 Series
annunciator.
Weight
g
Piece Weight
------.
0.0.
Weight
g
Piece Weight
3000.0.
3000.0.
3000.0.
3000.0.
3000.0.
3000.0.
Weight
g
Piece Weight
0.0.
0.0.
Count
g/pc
------.
CEntr
0..
Count
g/pc
0..
SAnnP.
------.
300.000.
50..
SAnnP.
------.
60.0000.
Count
g/pc
40..
40..
pcs
0..
pcs
0..
10..
60.
60.
60..
60.
60.
50..
pcs
0. 0. 0. 0.
0..
0..
Publicidad
