Descargar Imprimir esta página

Domo DO7353H Manual De Instrucciones página 55

Calefactor cerámico de baño smart

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 61
ON/OFF SWITCH
Push the on/off switch to turn on or off the appliance. When you switch off the unit, the fan still works for
a few seconds before it stops completely.
When the device is switched off via this button, the device goes into standby mode. The display will show
"0", the time and the day. This means it is not completely disabled. You can only switch the device off
completely via the on/off switch on the back of the device.
POWER SETTING
You can choose from 3 power settings.
·
Low: 1500 W
·
High: 2100 W
·
ventilation
To use this, press the power setting button.
TEMPERATURE
You can set the temperature between 5°C and 35°C.
1.
You can now use the decrease "-" and increase "+" buttons to set the desired temperature.
2.
The temperature will flash on the display. Press the "OK" button to confirm.
When the set temperature has been reached, the heater will switch off and the unit goes into standby
mode. If the ambient temperature falls to 2°C below the set temperature, the unit will switch on again.
TIMER
Automatic switch-off
When the unit is switched on, you can set a timer so that it goes into standby mode after a certain amount
of time.
1.
Press the button "SET" to set the timer.
2.
The hours will flash. Use the decrease and increase buttons to adjust the hour. Press the "OK" button
to confirm.
3.
The minutes will flash. Use the decrease and increase buttons to adjust the minutes (in 15-minute
increments). Press the "OK" button to confirm.
4.
The remaining time will stay visible on the display and count down. When the time has elapsed, the
unit will switch off.
Automatic switch-on
When the unit is in standby mode, you can set a timer so that the unit will automatically turn itself on
after a period of time.
1.
Turn the appliance on using the on/off switch. Choose the desired setting (power or temperature).
Turn the appliance off using the on/off switch.
2.
Press the button "SET" to set the timer.
3.
The hours will flash. Use the decrease and increase buttons to adjust the hour. Press the "OK" button
to confirm.
www.domo-elektro.be
55
DO7353H

Publicidad

loading