Publicidad
Idiomas disponibles
Idiomas disponibles
4.
The minutes will flash. Use the decrease and increase buttons to adjust the minutes (in 15-minute
increments). Press the "OK" button to confirm.
5.
The remaining time will stay visible on the display and count down. When the time has elapsed, the
unit will switch on.
·
You can also switch the device on or off sooner by manually pressing the power button.
·
For any adjustment, if you do not press a button for 5 seconds, the setting will be saved and the
display will move on to the next parameter.
·
If you set the timer to 0 h, the mode will be cancelled.
PROGRAMMING
Weekly settings
This function allows you to programme weekly settings up to 2 heating
periods per day. Each period consists of an automatic switch-on and
automatic switch-off.
1.
Press and hold the programme button
and day 1 will flash on the display. You can now adjust the weekly settings.
2.
[DAY]
Select the day you want to set using the decrease "-" and increase "+" buttons. Press
"SET".
3.
[P1] The start and finish time of the 1st heating period will be displayed. Press "OK".
4.
[ON] The starting time will flash. Set the start time using the decrease "-" and increase "+" buttons.
Confirm with "OK". Set the minutes and confirm with "OK".
5.
[OFF] The finish time will flash. Set the finish time using the decrease "-" and increase "+" buttons.
Confirm with "OK". Set the minutes and confirm with "OK".
6.
[°C] The temperature will flash. Set the desired temperature using the decrease "-" and increase "+"
buttons. Confirm with "OK".
7.
[P2]
The start and finish time of the 2nd heating period will be displayed. Press "SET" and then
follow the steps as described at points 4-6.
8.
To programme the remaining day, return to point 2 and follow the steps.
·
To turn off a heating period in a previous settings, press and hold the programme button
seconds and press "SET" on the desired day. Set both the start time and the finish time to OFF using
the "SET" button.
·
If a parameter does not require any adjustment, press "OK".
·
Leave the programme module at any time by pressing and holding the programme button
seconds.
·
Once a day has been set, the display will automatically move on to the next day.
·
If you wish to delete all programmed information, return to factory settings as described below in this
manual.
Enabling weekly settings
You can switch the weekly settings on or off by pressing the programme button
appear on the display.
56
DO7353H
for 5 seconds. The symbol
for 5
for 5
. The symbol will also
Publicidad
