cecotec Cumbia CREMMAET COMPACT Manual De Instrucciones página 21

ENGLISH
3. INSTALLATION AND INITIAL USE
1. Remove the coffee machine from the box and save the packaging material for future use.
Place the machine on a flat and stable surface. Fig. 3
2. Remove and clean the water tank Fill it with water and insert it into the coffee machine.
Fig. 4
3. Fill the container with coffee beans. Fig. 5
4. Plug in the coffee machine.
5. Place a container under the coffee spout to collect the hot water dispensed by the coffee
machine.
6. Press the power button to switch on the machine and clean the coffee spout. Fig. 6
7. Press and hold down the " " button for 3 seconds to start cleaning/flushing of
the coffee machine. Discard the water dispensed by the coffee machine and clean the
container.
8. Press the buttons according to the function you want to activate.
9. Press and hold the power button for 3 seconds to switch off the coffee machine.
4. OPERATION
Filling up the water tank. Fig. 4
- Remove and clean the water tank
- Fill it with water and insert it into the coffee machine.
NOTE:
Never exceed the maximum capacity of the water tank.
Making an espresso
1. Ajuste la altura de la salida de café y coloque una taza debajo. Fig. 7
2. Press the espresso button " "once to brew one small espresso.
3. Select the desired amount of coffee.
4. During grinding (the control panel display shows "g"), press the "
adjust the amount of coffee powder. During coffee preparation ("ml" is displayed on the
right-hand side of the control panel display), press "
liquid coffee.
5. Press the " " button to prepare two cups of coffee.
6. Press " " to stop coffee preparation.
Preparing an Americano
1. Adjust the height of the coffee spout and place a cup underneath. Fig. 7
2. Press the Americano button " " to prepare an Americano coffee.
40 CREMMAET COMPACT
" or " " buttons to
" or " to adjust the amount of
3. Select the desired amount of coffee.
4. During grinding (the control panel display shows "g"), press the "
adjust the amount of coffee powder. During coffee preparation ("ml" is displayed on the
right-hand side of the control panel display), press "
liquid coffee.
5. Press the " " button to prepare two cups of coffee.
6. Press " " to stop coffee preparation.
Preparing hot water
1. Adjust the height of the coffee spout and place a cup underneath. Fig. 7
2. Press the hot water button " " to dispense hot water.
3. Once the desired amount of hot water is obtained, press the "
to stop dispensing water.
Cleaning/Rinsing
1. Adjust the height of the coffee spout and place a container underneath. Fig. 7
2. Press and hold down the button "
coffee machine. This function uses 60 ml of water and is automatically deactivated.
Settings and configuration
In standby mode, press and hold the settings button "
configuration interface.
1. Settings for Espresso and Americano coffee. Fig. 8
a. Once inside the setting interface, the Espresso and Americano buttons will flash.
b. Press the Espresso button " " or the American button "
coffee you want to change.
c. Once you have pressed the desired button, you have accessed the interface for setting
the amount of coffee powder. Press "
coffee powder.
d. Then, press the Settings/Exit button "
press " " or " " to increase or decrease the Espresso flow rate.
e. When the configuration is finished, press the "Settings/Exit "
the next step, and press the button 7 times to return to the standby interface.
2. Temperature settings.Fig. 9
After configuring the quantity and flow rate settings, press the Settings/Exit button "
" to enter the temperature settings interface. Press the button "
temperature.
ENGLISH
" or " " buttons to
" or " to adjust the amount of
" button on the panel
" for 3 seconds to start cleaning/flushing of the
" for 3 seconds to access the
" depending on the type of
" or '" " to increase or decrease the amount of
" to enter the coffee flow setting interface:
" button to advance to
" or " " to adjust the
CREMMAET COMPACT 41