ENGLISH
3.
Automatic shutdown settings.Fig. 10
After configuring the quantity and flow rate settings, press the Settings/Exit button "
enter the automatic shutdown settings interface. Press "
machine to shutdown (0.5 h, 1 h, 2 h... 24 h).
4.
Start-up settings.Fig. 11
After configuring the quantity and flow rate settings, press the Settings/Exit button "
enter the automatic start-up settings interface. This function is for authorised professionals
or after-sales personnel only.
5.
Manufacturing information.Fig. 12
After setting the temperature adjustment, press the Settings/Exit button "
check both the manufacturing information and the date and batch number.
6.
Decalcification. Fig. 13
A.
Pour the descaler into a container with clean water and follow the manufacturer's
instructions.
B.
Take out the water tank, pour the descaling product into the tank and add clean water
until the tank is completely full, never exceed the maximum.
C.
Place a container under the coffee spout.
D.
In the standby interface, press and hold the Settings/Exit button "
seconds. Then press the Settings/Exit button "
indicator "
" will light up on the display.
E.
Press the Confirm button "
" to start descaling.
F.
Once emptied, remove the water tank and add fresh water until the coffee machine
completes the cycle. This process may take a few minutes. When the container is full,
empty it.
G.
When descaling is complete, be sure to carry out several Cleaning/Rinse cycles as
indicated in the "Cleaning/Rinse" section.
H.
When the coffee machine is free of descaling agent after the necessary "Clean/Rinse"
cycles, it is ready for normal operation.
7.
Adjusting the grinding level. Fig. 14
-
When you need to adjust the grind level of the coffee beans, turn the grind level knob when
the grinder is in operation, otherwise the grinder may be damaged.
-
Adjust the grind level according to the degree of roast of the coffee beans you use (medium
roast beans are recommended).
-
If the coffee comes out too slowly during preparation (the coffee powder is too fine), turn
the grind level selector clockwise until a coarser grind is obtained.
-
If during preparation the coffee comes out too fast and too clear (the coffee powder is too
coarse), turn the grind level knob anticlockwise until a finer grind is obtained.
42
CREMMAET COMPACT
" to
" or "
" to programme the coffee
" to
" 4 times to
" and wait for 2
" again four times and the descaling
Tips
1.
Do not overfill the bean container or use beans that are too long, otherwise the quality of
the coffee and the performance of the grinder will be affected, and the beans will become
wet (especially in humid environments).
2.
Do not overfill the bean container or leave the coffee beans inside for a long time so that
they do not get too wet and lose freshness (especially on humid days). Moisture will
affect the grind, brew and taste of the coffee.
3.
If the coffee beans are wet, empty the container and fill it with fresh coffee beans for
better taste. Turn the grind level knob to maximum and try grinding the coffee beans. If
the coffee machine is working properly, return the knob switch to its original position.
4.
If the coffee beans do not grind properly, it is possible that the coffee beans are too
wet or that there is too much coffee bean oil accumulated inside. In the latter case, add
grinder cleaner to the bean container and try grinding. If the grinder is working properly,
return the grind level knob to its original position. If not, repeat the process until it works
properly. Perform several "Clean/Rinse" cycles after using grinder cleaner.
Warnings and cautions
1.
Empty coffee bean container
When "
" lights up, it means the bean container is empty. Fill up the container.
2.
Double coffee
When the double coffee button "
" lights up, the double coffee function is activated. The
machine will prepare 2 coffees.
The machine will not prepare the second coffee if the bean container is emptied during the
preparation of the first coffee.
3.
Open panel
When "
" lights up, it means that the right panel is open: close it.
4.
Water tank empty
When the "
" icon lights up, it means that the water tank is empty or low on water: fill it up.
5.
Processing unit not installed
When "
" lights up, it means that the processing unit is not installed: you must install it
properly.
6.
Coffee residues tank
When "
" lights up, it means that the waste-holding tank is not properly positioned or
installed or that it is full and needs to be emptied.
Empty the waste container every 8 cups of coffee or if you are not going to use it for a long
period of time.
ENGLISH
CREMMAET COMPACT
43