BRAND Dispensette S Instrucciones De Manejo página 72

9 Cleaning
2. Rinsing the instrument
a.
Screw the instrument onto a bottle filled with a suitable cleaning agent (e.g. deionized water)
and rinse the instrument several times by completely filling and emptying it.
3. Removing pistons
Avoid swapping pistons
The pistons and cylinders are individually matched, and should not be swapped with pistons from
other instruments!
a.
b.
c.
d.
4. Clean the piston and cylinder, and refit the device
Special feature of Dispensette
With the Dispensette
72
Operating manual
a.
b.
c.
d.
e.
®
S Organic
®
S Organic, always insert the piston vertically into the cylinder while rotating it.
NOTICE
Carry out assembly and disassembly at the maximum
volume setting only. To do this, turn the volume adjust-
ment wheel as far as it will go in + direction (= maximum
volume).
Slide the latch to the left.
Remove the front housing shell.
Use the assembly tool to loosen the piston mounting
nut and pull the rear housing section backwards.
Then carefully pull the piston out of the cylinder.
NOTICE
997490