Publicidad
Idiomas disponibles
Idiomas disponibles
_
Shoulder
Harness Clamp
Fig. 13
Fig. 14
KNOW YOUR
BRUSHCUTrER/TRIMMER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations
with your unit to familiarize yourself with the location of various controls and adjustments.
CHOKE CONTROL
Save this manual for future reference.
FUEL CAP
STARTER ROPE GRIP ____
BLADE
SHIELD
THROTTLE
___
LOCK-OUT\
ON/OFF STOP
\\
CONTROL
_-
SHOULDER
HARN_
,/
ASSIST HANDLE
44-TOOTH
SAW BLADE
BLADE
SHIELD
J
J
4-TOOTH
BLADE
SHAFT
HOUSING
CUTTING
_ATTACHMENT
SHIELD
CUTTING
ATTACHMENT
PRIMER BULB
THROTTLE CONTROL
SPARK PLUG
ON/OFF STOP CONTROL - used to turn the engine ON
and OFF. The switch must be in the ON position when
starting the engine.
PRIMER BULB - removes air from the fuellines and fills
the carburetor with fuel.
THROTTLE
CONTROL - controls engine speed for
various cutting conditions.
ASSIST HANDLE - used to hold the unit during
operation.
CUTTING ATTACHMENT
SHIELD - protects operator
from thrown debris. Contains line cut-off blade to make
sure the line is not extended beyond its proper length.
Cutting attachment
shield must be installed at all times
when using the cutting attachment.
CUTTING ATTACHMENT
- consists of a reel housing,
reel, spring, Bump Knob
TM
and cutting line.
BLADE SHIELD - protects operator from thrown debris.
Blade shield must be installed at all times when using the
4-tooth blade and the 44-tooth saw blade.
4-TOOTH BRUSH BLADE - used for cutting grass,
weeds, and woody brush up to 1/2 inch diameter.
44-TOOTH SAW BLADE -used for cutting grass, weeds,
and woody brush up to 2 inches in diameter.
-12-
Publicidad
