Publicidad
Idiomas disponibles
Idiomas disponibles
MACHINERY AND TOOLS
Submersible Tools & Equipment
1.
End Setting Tool
•
Refer to
"Collet Hammer Tools" on page
•
Fixture Bolts
Motor Size
6"
8"
10"
2. Collet Hammer
•
Refer to
"End Setting Tools" on page
3. Allen wrench - SAE or standard (T-handle design preferred)
Size
(inches)
1/8
1/2
4. Combination wrench or socket and ratchet set
Size
(inches)
1/2
7/16
6FJMHXWY sub-turbine bowl bolts
1/2
8FJLKMH sub-turbine bowl bolts
9/16
7FMH, 10FJKLMHWYZ sub-turbine bowl bolts
3/4
15/16
3/4
5. Flat-head or standard large screwdriver
6. 1/2" - 13x3-1/4" set screw
7.
Ball peen hammer
8. Set of 1/8" stamps for imprinting nameplate information
9. Dow Corning® 111 valve lubricant and sealant (food grade grease)
10. Adhesive Loctite® 243 and Loctite® 277
11. Fine emery cloth or steel wool for deburring purposes
NOTE: Additional machinery and/or equipment is required to cut and deburr shafting and cable guards or
remove and install bronze bearings.
4.
Hex Bolt Size
Quantity
1/2" - 20x1-3/4
5/8" - 11x2
3/4" - 10x2-3/4
5.
Description
Motor coupling set screws
FST upthrust adjustment
Description
cable guard screws
9FLH sub-turbine bowl bolts
11LMH sub-turbine bowl bolts
upthrust lock nut
4
MACHINERY AND TOOLS
Submersible Tools & Equipment
3
Publicidad
