Publicidad
Setting up the weather station
1. Attach the rain gauge to the side of the weather station case.
2. Assemble the wind speed meter (see section "Assembling the wind speed meter")
and put it in the holder of the weather station case.
3. Install the wind vane on the top of the case.
Battery installation of the blinking light
The blinking light requires 2 AA size batteries.
1. Unscrew the cover of the battery compartment
on the weather station case with a screwdriver.
2. Install the batteries according to the polarity
indicated.
3. Replace the cover of the battery compartment
and tighten the screw.
The wind speed meter
In addition to wind speed, this device
can also measure temperature.
Name of Parts
1. Wind cps
2. Power indicator
3. ON/OFF/CLR Button
4. UNITS Button
5. AVG/MAX Button
6. MODE Button
7. Temperature Sensor
8. LCD Display
ON/OFF/CLR Button
- Press to turn on the device. Device will turn off automatically if no key is pressed for 3
minutes.
- Press to clear the stored maximum value of wind speed or temperature when it is
being displayed.
- Press and hold for 2 seconds to power off the device.
UNITS Button
- Press to change the unit of measure.
42
Publicidad
