KRESS MISSION KR233 Instrucciones De Usuario página 15

5
Replacing the battery
WARNING: Power off before attempting any adjustment, replacement or repair.
Before replacing the blades, turn your Mission
If you need to replace the battery, follow these
steps:
1. Gently turn your Mission
2. Remove the screws on the battery cover.
Remove the battery cover.
3. Remove the screws on the sheet metal.
Remove the sheet metal.
4. Unplug the connector. Replace the old battery
with the new one. Then plug the connector.
5. Refit the sheet metal. Place the cover back in
its position and tighten the screws.
RTK upside down.
TM n
RTK OFF and put on protective gloves.
TM n
15
EN