ENGLISH
14
4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 14
Adjusting the coffee length
The machine allows the amount of brewed espresso coffee to be adjusted
according to your taste and the size of your cups.
Each time the "
" or "
amount of coffee. Each button may be individually programmed for a specific brew
setting.
The following procedure describes the programming of the "
1
Place a cup under the dispensing spout.
2
Press and hold the "
during this phase. Release the button: the machine is now in programming
mode.
The machine starts brewing coffee.
3
When the desired quantity of coffee is in the cup, press the "
Now the "
" button is programmed; each time it is pressed, the machine will
brew the same amount of espresso that was just pre-set.
Note: To program the "
followed. Press the "
" button to stop brewing when the desired amount of
coffee is reached.
Espresso and coffee brewing
Espresso and coffee brewing using coffee beans
Before brewing a coffee, check that both the water tank and the coffee bean
hopper are full.
1
Turn the aroma selector switch to select the desired aroma.
2
Place 1 or 2 cups under the dispensing spout.
" button is pressed, the machine brews a pre-set
" button. The "
" button and the "
" coffee brew button, the same steps should be
" button.
" light flash
" button.
03/12/2018 12:33:13