GreenWorks Commercial CZ48R18X Manual Del Operador página 16

9 KNOW YOUR MACHINE
9.1 CONTROL PANEL
1
5
# Name Function
1 Digital dis- This display shows important electri-
play cal system information. Refer to the
Electrical section for complete infor-
mation.
2 Switch Switching between pages, direction
page - UP up.
3 Home/back Return to prior screen. Press and
button hold down to return to the home
screen.
4 Switch Switching between pages, direction
page - down.
DOWN
5 Push but- The push button is used to turn the
ton with mower on and off. The key fob must
key fob be inserted before the push button
can be operated.
6 Deck Pull the PTO switch up to activate
blades the mower's cutting blades. Push the
On/Off knob down to stop the cutting blades.
switch
(PTO)
2& Lock To lock and unlock the touch screen
4 screen (this disables the touch screen's
functions), press and hold the UP
and DOWN buttons for 3s.
English
2
3
4
6
15
NOTE
Always drive with both hands. Do not drive with just
one hand.
9.2 STEERING CONTROL LEVERS
The two levers control the mower's speed, direction,
stopping, neutral lock, and parking brake. Levers are
used to steer, accelerate, decelerate, stop, and change
direction. When the control levers are in the park brake
position, the mower will not move.
9.3 SAFETY START INTERLOCK
SYSTEM
The machine is equipped with a safety start interlock
system consisting of the parking brake switches,
operator presence control switch, and PTO switch.
The mower's safety start interlock system is also
designed to protect the operator and others from
accidental injury due to unintentional traction drive
system starting.
Check mower safety start interlock system daily, prior
to operation. This system is an important mower
safety feature. It should be repaired immediately if
it malfunctions. The machine incorporates a separate
operator presence control switch which will stop the
drive system and blade motors when the operator is not
in place for any reason while the mower is operating.
This is a safety feature designed to prevent runaway or
accidental entanglement.
WARNING
The safety interlock system must not be disconnected
or bypassed. Doing so could cause the machine to
operate unexpectedly, resulting in personal injury.
To inspect the system:
EN