Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Repairs or maintenance requiring power should be
performed by trained maintenance personnel only.
•
Park the mower on level ground. Make sure that
steering control levers are in the neutral position,
and that the deck blades switch (PTO) is in
"OFF" position. Raise deck, remove the key fob
and disconnect battery cables (P+) in battery box
compartment.
•
Any maintenance operation that requires the
removal of safety covers must be performed by a
trained service technician.
•
Before working on or under the deck, make certain
the key fob is removed and deck blades switch
(PTO) cannot be accidentally started and disconnect
battery cables (P+) in battery box compartment.
•
Use a stick or similar instrument to clean under
the mower, making sure that no part of the body --
especially arms and hands -- is under mower.
•
Keep your machine clean and remove any deposits
of trash and clippings.
•
Keep battery compartment, deck and operator's
station clean of accumulated trash, grass clippings,
and other debris.
•
Clean battery compartment, drive motor
compartment, mower deck, etc., of all dirt and
debris. To clean, use only compressed air. DO NOT
use water, solvents, hard cleaners or abrasives.
•
Always wear adequate eye protection when
servicing the batteries or when grinding mower
blades and removing accumulated debris. Never
attempt to make any adjustments or repairs to
the mower's drive system, mower deck or any
attachment while the traction drive system is
running. Repairs or maintenance requiring power
should be performed by trained maintenance
personnel only.
•
Never work under the machine or attachment unless
it is safely supported with jack stands. Make certain
machine is secure when it is raised and placed on
the jack stands.
•
The jack stands should not allow the machine to
move when the traction drive system is running and
the drive wheels are rotating. Use only certified jack
stands. Use only appropriate jack stands, with a
minimum weight rating of 2000 pounds (907.2 kg)
to block the unit up. Use in pairs only. Follow the
instructions supplied with the vehicle stands.
•
Do not touch hot parts of machine.
•
Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good working
condition.
•
Never tamper with safety devices. Check their
proper operation regularly.
•
Press push button to turn the mower OFF, remove
the key fob before unclogging the discharge chute.
IMPORTANT
English
•
Never clear the discharge chute with the machine
running. Press push button to turn the mower OFF,
remove the key fob and be sure the blades have
stopped before cleaning. Use a stick to clear a
plugged discharge area. Never use your hand!
•
Stop unit and allow blades to stop before unclogging
chute. Grass collection system components are
subject to wear, damage and deterioration, which
could expose moving parts or allow objects to be
thrown. Frequently check components and replace
with manufacturer's recommended parts, when
necessary.
•
Exercise caution when working under the deck as
the mower blades are extremely sharp. Wear gloves
and use extra caution when servicing them.
•
Use only genuine greenworkscommercial Mower
parts to ensure that original standards are
maintained.
•
Always disconnect batteries when transporting unit.
Keep unit free of grass clippings, leaves and other
debris.
16
TRANSPORTATION AND
STORAGE
16.1 TRANSPORTING THE LITHIUM-
ION BATTERIES
The US Department of Transportation and international
transportation authorities require that lithium-ion
batteries be transported using special packaging and
only be transported by carriers certified to haul them.
In the US, you are allowed to transporta battery when
it is installed on the machine as battery powered
equipment, with some regulatory requirements. Contact
the US Department ofTransportation or the appropriate
government body in your country for detailed
regulations on transportation of your batteries or the
machine with the batteries equipped. For detailed
information on shipping a battery, contact your
Authorized Service Dealer.
16.2 TRANSPORTING THE MACHINE
Do not tow this machine, it may cause damage to the
drive system.
Use care when loading or unloading the mower onto a
trailer. Ensure the cutting deck is raised to the highest
position so that it is not caught on the ramp. The
wheels on the mower can go off the ramp or trailer,
causing the mower to pivot or tip over, and result in a
crush hazard that can cause death or serious personal
injury.
1. Park the mower on a level surface.
56
WARNING
WARNING
Publicidad
