Publicidad
Idiomas disponibles
Idiomas disponibles
Error Codes Error Contents
TR 43
Right Pot2 Wiper High
TR 44
Right Pot2 Throttle Input
Abnormal
TR 46
Right Wheel Motor Control-
ler NV Memory Failure
TR 47
Right Wheel Motor Control-
ler HPD Sequencing
TR 49
Right Wheel Motor Control-
ler Parameter Change
TR 4A
Right Wheel Motor Control-
ler EMR Switch Redundan-
cy
TR 51
Display CAN Communica-
tion Abnormal
TR 52
Left Wheel Motor Control-
ler CAN Communication
Abnormal
TR 53
Vehicle Initial State Detec-
tion Abnormal
TR 54
Autonomous Controller
CAN Communication Ab-
normal
TR 55
BMS CAN Communication
Abnormal
TR 56
Operator Presence Detec-
tion Abnormal
TR 58
Right Blade Motor Control-
ler CAN Communication
Abnormal
TR 59
Limp Home Mode has been
activated
English
User's Operation Suggestions
1. Please check if the right throttle is well connected.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please check if the right throttle is well connected.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please restart the vehicle.
2. Please contact after-sales service.
1. Please reapply inputs in correct sequence.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please restart the vehicle.
2. Please contact after-sales service.
1. Please correct the emergency reverse switch NO input and emer-
gency reverse switch NC input.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please check if the CAN communication wire on the display is well
connected.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please check if the CAN communication wire on the left wheel
motor controller is well connected.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please check if the left and right levers are in the park position and
the PTO is pressed.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please check if the left and right levers are in the park position and
the PTO is pressed.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please check if the CAN communication wire on the battery pack is
well connected.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please make sure Operator Presence Control Switch is closed be-
fore operating the left and right levers.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please check if the CAN communication wire on the right blade
motor controller is well connected.
2. Please restart the vehicle.
3. Please contact after-sales service.
Please contact vehicle owner to unlock the vehicle.
35
EN
Publicidad
