cecotec BOLERO SQUAD I 3001 Manual De Instrucciones página 70

ENGLISH
The touch controls do
not work
It is difficult to use the
touch icons
The glass is damaged
Some cookware makes
crackling or popping
noises
The induction hob
makes a slight buzzing
sound when used at
high power
Fan noise from the
induction hob
Cookware does not heat
up and does not appear
on the display
70
The icons are locked.
There may be a slight film of
water on the buttons, or you
may be using your fingertip to
press the buttons.
Cookware with rough edges.
Use of inappropriate and
abrasive scouring pads or
cleaning products.
This may be due to the
construction of your cookware
(layers of different metals that
vibrate differently).
This is due to the induction
cooking technology.
A cooling fan integrated
in this induction hob has
been activated to prevent
overheating of the electronic
components. It may still
operate even after turning off
the induction hob.
The induction hob does not
detect the cookware because
it is not suitable for induction
cooking.
The induction hob does not
detect the cookware because
it is too small for the cooking
area or is not centred in it.
Unlock the icons. Check the
'Buttons lock' section for
instructions.
Make sure the touch control
area is dry and use your finger
base to press the buttons.
Use cookware with flat and
smooth bases. Check the
'Selection of the suitable
cookware' section. Check the
'Cleaning and maintenance'
section.
This is normal for cookware
and does not indicate a fault.
It is usual, but the noise
should decrease or completely
disappear by lowering the
power setting.
This is usual and you do not
need to worry. Do not unplug
the hob from the mains if the
fan is still running.
Only use cookware designed
for induction hobs. Check
the 'Selection of the suitable
cookware' section.
Centre the cookware and make
sure its base matches the size
of the cooking area.