cecotec BOLERO SQUAD I 3001 Manual De Instrucciones página 73

The cooking power
indicator turns on, but
the cooking areas do
not heat up
Heating stops suddenly
during operation and
the display shows a
flashing "u"
When trying to heat
areas of the same size,
like areas 1 and 2, the
display shows 'u'
The fan motor produces
unusual noises
High temperature of
the cooking hob.
The fan is faulty.
The power board is
damaged.
The cookware is not
suitable.
The cookware
diameter is too small.
The hob has
overheated.
The power board and
the board connected
to the display
malfunction.
The display board of
the communication
unit is damaged.
The main board is
damaged.
The motor fan is
damaged.
The room
temperature may
be high. The air
inlet or outlet may
be blocked.
Check if the fan
operates as usual.
If not, replace the
fan.
Replace the power
board.
Use a suitable
cookware.
The unit has
overheated.
Wait for the hob
temperature to
return to normal.
Press the Power
button to restart
the product.
Check the
connections.
Replace the display
board.
Replace the power
board.
Replace the fan.
BOLERO SQUAD I 3001
ENGLISH
The cookware
detection circuit is
damaged, replace
the power supply
board.
73