Publicidad
Idiomas disponibles
Idiomas disponibles
Indicators and functions
1-
Temp: Display the set temperature. Adjust temperature via
and
.No display in this area if the unit is on FAN mode.
2-
Transmitting display: The icon will flash once when the sig-
nal is sent by remote controller.
3-
ON/FF: Icon is displayed when the remote controller is tur-
ned on, or vice versa.
4-
Running mode: Press MODE to display current running
mode. AUTO, COOL, DRY, HEAT and FAN can be selected.
(HEAT function is invalid for cool only type unit.)
5-
Time: Display the current set time. Press CLOCK for 5s,
icon indicating hour will flash. Press this button again, icon
indicating minute will flash.
figure. Setting or modification is effective only by pressing
OK button to make confirmation.
6-
Lock: The icon will be lightened or off when pressing
LOCK. In locked state, all the buttons are ineffective
except button LOCK.
38
REMOTE CONTROLLER
7-
8-
9-
Note:
remote controller is electrified for the first time or reset.
and
are used to adjust the
Time ON/OFF: In the state of time ON, icon ON will be ligh-
tened, which is the same to the state of time OFF. Setting
timer ON and OFF simultaneously, both icons ON and OFF
are displayed.
Fan speed: Press FAN SPEED to display the current wind
speed. AUTO, LOW, MED and HIGH can be selected.
Thedefault state is high fan speed for the unit without
medium fan speed.
Economic operation: This icon will be lightened or off when
pressing ECO button.
All the above icons will be displayed only when the
Publicidad
