Laica ISEO Serie Manual De Usuario página 24

EN
English
IT
Italiano
FR
Français
DE
Deutsch
Problem
ES
Español
The appliance does not
work.
"E1" appears on the
display.
"E2" appears on the
display.
"E3" appears on the
display.
"E4" appears on the display.
The water flow has slowed
down to nothing.
Dark coloured residues
inside the jug.
does not appear on the
display.
EN
English
IT
Italiano
FR
Français
TROUBLESHOOTING
DE
Deutsch
Possible cause
ES
Español
The plug is not connected to
the power socket.
The kettle was removed
from the base before the
boiling cycle had finished.
Sensor malfunction.
Faulty circuit.
The thermal cut-out tripped
because the appliance was
switched on without water.
The filter cartridge was not
activated correctly.
Air bubbles may form
inside the filter cartridge,
preventing the water from
flowing properly.
The vegetable carbon in the
filter may release a small
amount of fine powder
(completely harmless).
The cartridge replacement
indicator is powered by a
non-replaceable 3V battery.
The battery has reached the
end of its service life.
24
Solution
Insert the appliance plug into
a power socket.
Put the kettle back on the
power base and switch it on
again.
The appliance cannot be used.
Disconnect it from the power
socket and contact the dealer.
The appliance cannot be used.
Disconnect it from the power
socket and contact the dealer.
Switch off the appliance,
disconnect it from the power
socket and let it cool down
before refilling it.
Repeat the steps in the
"Preparing the filter cartridge"
paragraph.
Remove the filter, immerse it
in water and force the bubbles
out, then drain it and put it back
in the water tank.
Repeat the steps in the
"Preparing the filter cartridge"
paragraph.
Continue to use the kettle
without this function.