Descargar Imprimir esta página

Foppapedretti Street Manual De Instrucciones página 40

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 83
PRECAUTIONS TO MAKE SURE YOU HAVE CORRECTLY FASTENED THE CAR SEAT
HARNESS
IMPORTANT
For the safety of your child, always make sure that:
• The harness belts are correctly adjusted according to the
child's height, and are correctly tightened;
• The chest straps are adjusted in the correct position;
• The harness belts are not twisted;
• The tabs are properly engaged in the buckle
REMOVING THE CAR SEAT FROM THE VEHICLE / REMOVING THE ISOFIX SYSTEM
Releasing the Top Tether: To release the Top Tether belt, press the button on the
Top Tether belt-tightening adjuster and loosen the belt to reduce the tension (fig. 20).
Unhook the belt anchoring carabiner.
Push the car seat against the backrest of the passenger seat (fig. 21).
At the same time press the ISOFIX release buttons and retract the ISOFIX connectors
(fig. 22).
Remove the car seat from the vehicle (fig. 23).
REMOVING THE HARNESS (Storing the safety harness away)
Completely loosen the shoulder straps, see paragraph "ADJUSTING THE SEAT BELT
(HARNESS) (Children from 76 to 105 cm)" (fig. 24).
Press the handle on the headrest and, keeping it pulled, raise or lower the headrest,
adjusting it according to the child's height (fig. 25).
Press the red button on the central buckle to release the shoulder straps (fig. 26).
Unhook the press studs on the sides of the backrest fabric, place the shoulder straps on
the back of the fabric. Place the buckle tips on the seat sides, in the lower part (fig. 27).
Lift up the seat cover fabric, pulling carefully and gently.
Unthread the buckle inwards from the slots in the fabric and padding and insert the
buckle into the internal compartment.
Reposition the internal padding correctly on the seat, attach the press studs (fig. 28).
• ENGLISH •
USE IN THE VEHICLE
40

Publicidad

loading

Este manual también es adecuado para:

Run