Publicidad
Idiomas disponibles
Idiomas disponibles
The following parameters are stored in each configuration: the name assigned
to the configuration, frequency or channel number, TV system, type of measurement,
external units supply voltage (VLNB), measurement units sound parameters, LNB-
oscillator frequency, channel bandwidth (digital), symbol rate (digital), code rate (digital)
and spectral inversion (digital).
The different measuring configurations can be retrieved with the Datalogger
function, in order to conduct different data acquisitions in a completely automatic way
and store them in the memory for later print-out or processing (see paragraph '4.9.4.4
Datalogger function').
It is possible to associate a specific measurement configuration with the
execution of a previously edited DiSEqC program (see '4.9.4.18 DiSEqC Commands
Generator').
4.12.1 Storing a Measurement Configuration (STORE)
The process of storing a measurement configuration is the following:
1.
Select the configuration you want on the PROLINK-4 (freq./channel, band, etc.).
2.
Press key
configuration parameters. Then turn the rotary selector [4] to the memory
number that you wish to store the configuration in (from 1 to 99). This number
corresponds to the column headings of the Datalogger function.
If a configuration is stored in a memory location already containing information,
that data will be lost.
3.
(Optional) If you wish to assign a name to a memory position press key
[31], the fist character of the name will blink, turn the rotary selector [4] and the
different characters will appear in the first position of the configuration name.
When you have chosen the first character press the rotary selector again [4] to
automatically move on to the second character. Repeat the process for a
maximum of four characters.
4.
(Optional) A memory position may be assigned to the name of a previously
edited DiSEqC program, thereby associating it with the execution of the
memorised measuring configuration.
Whenever it is established a satellite configuration will appear the DiSEqC
parameter. In order to activate it, accede by means of the key
pressing the rotary selector [4] to view the list of edited programs (See section
'4.9.4.18 DiSEqC Command Generator') and select the program to execute.
Page 86
[25] until the monitor displays the STORE screen. Check the
USER'S MANUAL. PROLINK-4
[31] and
02/2003
Publicidad
