OHAUS Adventurer AX4201/E Manual Del Usuario página 7

EN-6
Main Application Screen
Application
Instructional Messages
Stability (*), Net (NET),
Gross (G) and/or center
of zero (>0<) indicators
Reference Fields
MENU & SCREEN NAVIGATION
Touch Menu to open the menu list.
Calibration:
Touch to view calibration
options.
Balance Setup:
Touch to view and change
balance settings.
Weighing Units:
Touch to view and change
weighing units.
Data Maintenance:
Touch to view data
maintenance settings.
Communication:
Touch to view COM Device
Settings and Print Settings.
GLP and GMP Data:
Insert user data for
traceability.
4.2 Using the Balance
Note: Before using any application, be sure the balance has been leveled and
calibrated.
Weighing Application
1. If required, place an empty container on the pan and press Tare.
2. Add sample to the pan or container. The display shows the weight of the sample.
5. MAINTENANCE
5.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power
supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning
agents.
Glass surfaces may be cleaned with a commercial glass cleaner.
The housing may be cleaned with a damp cloth and mild detergent if necessary.
User logout button
Result Field: Information varies by
application
Touch g to change unit
Application Buttons:
Functions vary by application
Factory Reset:
Touch to do a Factory reset of
menu settings.
User Mangement:
Touch to enter the submenus:
User Profiles (Edit the user),
Change Password and Auto
Standby