10Partes De Desgaste - Buchi Rotavapor R-300 Manual De Instrucciones

BÜCHI Labortechnik AG
10.2.10
Manual de instrucciones Rotavapor® R-300
Pieza intermedia
Intermediate piece with valve, Incl. drain valve,
hose connection ∅8 mm, BJ35/20
Connection piece with 3-way valve, for aeration of the
system. Placed between condenser and receiving
flask. Allows to remove and empty the receiving flask
during the evaporating process.
Set Rotavapor® connection
Combining the Multivapor with the Rotavapor® requi-
res a T-shaped glass connector for the condenser of
the rotary evaporator. The T-piece consist of two sphe-
rical joints for the condenser assembly and a SVL 22
joint for the vacuum tube. The length of the tube is 400
mm.
Vacuum connection. Incl. drain valve, hose barb
Ø 8 mm, BJ35/20
Connection piece for aeration of the system, placed
between condenser and receiving flask.
Partes de desgaste
Junta de vacío
Vacuum seal VS26, PTFE base, NBR O-ring, FDA-complaint
Juntas
For cap nut GL14 to FEP, EPDM
Set. 10pcs, for hose barbs GL14, EPDM, black
Set. 10pcs, for hose barbs GL14, FPM, green
Set. 20pcs, for hose barbs GL14, silicone, red
Conexiones de tubos
Hose barb. Bent, GL14, incl. silicone seal
Hose barbs, set. 2 pcs, bent (1), straight (1),
GL14, silicone seal
Content: Hose barbs, cap nuts, seals
Hose barbs. set. 3 pcs, bent, GL14, silicone seal
Content: Hose barbs, seals.
N.º de pedido
11063430
048740
001006
N.º de pedi-
do
11069167
N.º de pedi-
do
038225
040029
040040
040023
N.º de pedido
018916
041939
041987
Anexo | 10
Figura
Figura
103/118