Buchi Rotavapor R-300 Manual De Instrucciones página 95

BÜCHI Labortechnik AG
Manual de instrucciones Rotavapor® R-300
Glass assembly CR. Cold trap reflux condenser,
2
500 cm , P+G-LT
For reflux distillations with distributor and shut-off valve
as well as for distillation of low-boiling point solvents.
No need of cooling liquid, but e.g. dry ice. Application
temperature: -70 to 40 °C. Content: 1 L receiving flask,
ball joint clamp, stopcock, feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket, holder.
Glass assembly E. Expansion condenser, 1500
2
cm
Optimised for distillations of foaming substances and
bumping sample solutions. Used with recirculating chi-
ller or tap water.
Features: Descending condenser with expansion ves-
sel. Cleaning hole on top. Connection for vapor tempe-
rature sensor. Content: 1 L receiving flask, required tu-
bings, ball joint clamp, stopcock, feeding tubing, holder.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket.
Glass assembly E. Expansion condenser, 1500
2
cm , P+G
Optimised for distillations of foaming substances and
bumping sample solutions. Used with recirculating chi-
ller or tap water.
Features: Descending condenser with expansion ves-
sel. Cleaning hole on top. Connection for vapor tempe-
rature sensor. Content: 1 L receiving flask (P+G), re-
quired tubings, ball joint clamp, stopcock, feeding tu-
bing, holder.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket.
Glass assembly S. Vertical condenser reflux,
2
1500 cm
For reflux distillations with distributor and shut-off val-
ve. Used with recirculating chiller or tap water.
Features: Cleaning hole on top. Connection for vapor
temperature sensor. Inner glass tube. Content: 1 L re-
ceiving flask, required tubings, ball joint clamp, stop-
cock, feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket, holder.
Glass assembly S. Vertical condenser reflux,
2
1500 cm , P+G
For reflux distillations with distributor and shut-off val-
ve. Used with recirculating chiller or tap water.
Features: Cleaning hole on top. Connection for vapor
temperature sensor. Inner glass tube. Content: 1 L re-
ceiving flask (P+G), required tubings, ball joint clamp,
stopcock, feeding tubing, distributor.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket, holder.
N.º de pedido
048293
11061112
11061113
048290
048291
Anexo | 10
Figura
95/118