Buchi Rotavapor R-300 Manual De Instrucciones página 92

10 | Anexo
92/118
Lab grease. Glisseal 40 (60 g)
To grease joints in order to increase tightness of sys-
tem.
Level sensor. Incl. O-ring, cable, rubber band
Prevents an overflow in the receiving flask of conden-
ser/secondary condenser. Placed on receiving flask.
Meant to be used with the Interface I-300 / I-300 Pro.
Repeating OQ. R-300 en
Official BUCHI documents.
Power plug fixation. For R-300
Used to fixate the power plug into Rotavapor®.
Set earthquake fastener. Lug for backside
To fasten device on lab bench.
Thread adapter. For vacuum connection, SVL22/
GL14
Use: To switch vacuum connection from a Rotavapor®
to Syncore® vacuum distributor (037686).
Vacuum connection. Incl. drain valve, hose barb
Ø 8 mm, BJ35/20
Connection piece for aeration of the system, placed
between condenser and receiving flask.
Vacuum valve. Magnetic valve, 24V/4W, Mini-
DIN, 1.5 m
Flow valve without flask, meant to be used with a cen-
tralized vacuum source or an unregulated vacuum
pump. Meant to be used with the Interface I-300 /I -300
Pro.
Vapor temperature sensor. Incl. cap nut, seal
GL14
Measures the vapor temperature inside the system.
Meant to be used with the Interface I-300 / I-300 Pro.
Water jet pump. Plastic
Used when tap water is used to generate vacuum.
Water jet pump, B-767: Magnetic valve (2 pcs.),
FFKM, 24V
Used when tap water is used to generate vacuum. In-
clusive: Cooling water valve. Meant to be used with a
vacuum controller/interface.
BÜCHI Labortechnik AG
N.º de pedido
048197
11060954
11063609
11063710
11062386
040871
001006
11060706
11060707
002913
031357
Manual de instrucciones Rotavapor® R-300
Figura
Rotavapor ® R-300
Installation Qualification