Publicidad
Idiomas disponibles
Idiomas disponibles
ATTENTION
Use of unsuitable descaling agents and failure to observe the processing
instructions may damage the appliance.
Only use Melitta® ANTI CALC liquid descaling agent for fully automatic
ƒ
coffee makers.
Observe the processing instructions on the packaging of the descaling
ƒ
agent.
ATTENTION
A water filter may be damaged if it is screwed in during the descaling
programme.
Remove the water filter when the appliance requests you to do so.
ƒ
Place the water filter into a vessel filled with tap water during the desca-
ƒ
ling programme.
The water filter can be reinserted and reused when the descaling pro-
ƒ
gramme is complete.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
»
The menu appears on the display.
2. Navigate to the Care > Descaling menu.
3. Select Start using the arrow buttons and confirm with "menu/ok".
4. Follow the further instructions on the display up to the end of the desca-
ling programme.
»
The ready symbol appears on the display.
9.8
Setting the water hardness
Setting the water hardness regulates how frequently you are requested to
descale the appliance. The harder the water, the more frequently the appli-
ance has to be descaled.
Information
The water hardness cannot be set if you use a water filter. The water hard-
ness is automatically set to 1 = soft (see section 9.9 Using a water filter on
page 92).
Determine the water hardness with the enclosed test strip. Observe the
instructions on the test strip packaging and in the table Item on page 58.
Care and maintenance
91
Publicidad
