Health O Meter 500KL Manual Del Usuario página 202

ASSEMBLY INSTRUCTIONS (CONTINUED)
6. Place scale platform C on its
side and place Column B on
its side, perpendicular to the
platform. The front of the
display head on Column A
should be facing forward and
above scale platform C.
7. Carefully pull the cable
connector from the bottom of
Column B and plug into the
RJ jack on scale platform C.
Caution: Once connected,
keep a firm grip on the
columns to ensure the load
cell connector cable is not
pulled out from the RJ jack.
This cable connects the
load cells to the display
head and must be entirely
plugged in for the scale to
function properly.
P/N UM500KL 500KG Rev 20191120
RJ Jack
201
Back to Home Page