CLEANING AND REPLACEMENT PARTS
Maintenance
The following pages provide instructions for maintenance, cleaning, calibrating, and
troubleshooting of the scale. Maintenance operations other than those described in this manual
should be performed by qualified service personnel.
Caution: Before first use, or after long periods of non-use, check the scale for proper
operation and function. If the scale does not operate correctly, refer to qualified service
personnel.
1. Check overall appearance of the total scale for any obvious damage, wear, and tear.
2. Inspect the AC adapter cord for cracking or fraying, or for broken/bent prongs.
Cleaning and Disinfecting
Proper care and cleaning is essential to ensure a long life of accurate and effective weighing.
1. Health o meter
cloth or disposable wipe:
● mild soap and water solution
● 70% isopropyl alcohol
● solution with 1-5% hydrogen peroxide concentration
After cleaning/disinfecting, wipe with a cloth dampened with water and then with a clean dry
cloth. To avoid residue build-up or damp surfaces, ensure all scale parts are completely dry
after cleaning.
2. Never use rough or abrasive materials to clean the scale, as these will damage the scale's
finish.
3. Do not submerge the scale in water or any other liquid.
4. Do not pour or spray fluids directly on the scale.
Replacement Parts
Parts may be available if a piece of the scale needs to be replaced. Contact Health o meter
Professional Scales Customer Service at 1-800-815-6615 to inquire about the availability of these
replacement parts.
Height Rod Headpiece
Part # 500HEADPIECE
Red Indicator Tab
Part # 500REDINDICATOR
P/N UM500KL 500KG Rev 20190408
®
Professional recommends using one of the following solutions on a soft
Height Rod
Part # 500KLROD
Height Rod Connector
Part # 500HRTAB
Wheel
Part # 500KLWHEELS
Replacement Mat
Part # 500KLMAT
282
Back to Home Page
Keypad Overlay
Part # 500KLKEYPAD
Battery Door
Part # BATTDOOR500
Column Connector
Part # 10-00266
Pillar Foot
Part # 500KLPILLARFOOT
Foot for Base
Part # 500KLFOOT