Publicidad
Idiomas disponibles
Idiomas disponibles
Batteries
! ATTENTION: do not use NON-rechargeable batteries
machines:
Leak-proof tubular batteries (WET): the electrolyte level
must be checked regularly.
Sealed batteries (GEL or AGM): this type of battery
requires no maintenance.
correspond to those listed in the section on the "Technical
of the machine. The use of heavier
batteries could seriously jeopardize manoeuvrability and
lead to the drive motor overheating. Lighter batteries of
lower capacity, on the other hand, will need to be charged
more frequently.
Machine Battery Selection Setting
! ATTENTION: where machines are shipped without
batteries, the machine is factory set for wet lead-acid
Depending on the type of battery selected (wet lead-
acid or sealed gel / AGM), the battery parameters of
factory setting.
! NOTICE
Enter the type of battery installed in the machine
software settings.
Follow the instructions below to adjust the machine logic
settings for the type of battery installed.
-
-
Press the Programming and Suction buttons at
the same time, then switch the machine on by
turning the ignition key.
-
Press the Suction button twice.
-
Press the Programming button to access the
battery type setting menu.
-
Select the type of batteries installed using the
Suction or Filter Shake buttons: "ACID battery" or
"GEL/AGM battery".
-
Press the Programming button to store the
parameter.
-
Press the Suction button repeatedly until "EXIT"
appears, then press the Programming button to
exit and save the parameter.
EN
14
Publicidad
