Publicidad
Idiomas disponibles
Idiomas disponibles
Fuses:
! ATTENTION: before carrying out the operations
apply the parking brake.
! ATTENTION: never install a fuse with a current
The replacement of fuses must be entrusted only to a
TENNANT service centre or to a TENNANT-approved
service technician.
In addition, the machine is equipped with resettable fuses
also known as thermal fuses. These are resettable devices
thermal fuse has been tripped, allow time for it to cool,
then press the reset button to restore normal operation.
If the cause of the overload by which the fuse was tripped
of current until the issue has been resolved.
! NOTICE
brush operating levers.
In the event that a side brush should stop working,
press the button to reset the fuse.
! NOTICE
centre brush operating lever.
In the event that the centre brush should stop
working, press the button to reset the fuse.
The remaining fuses are located in the battery compartment
and inside the front casing.
Battery maintenance
! DANGER: do not check the batteries by
up the batteries.
! DANGER: during any type of maintenance on
the batteries, the skilled technician must wear
the Personal Protective Equipment (gloves,
eyewear, overalls, etc.) needed to limit the risk
do not short circuit the battery poles, do not
generate sparks and do not smoke.
EN
23
Publicidad
