Publicidad
Idiomas disponibles
Idiomas disponibles
PRACTICAL GUIDE FOR THE
OPERATOR
Clothing and equipment
Wear safety shoes with non-slip soles.
Wear protective eyewear or visor and safety garments.
Depending on the surface being cleaned and on the
environment, the protective measures necessary for
atomized sprays include respiratory masks with class
FFP2 or equivalent or higher protection.
Before starting the machine
Clear away larger items of refuse before sweeping. Pick
up any pieces of wire, tape, string and similar items that
could become entangled around the brushes.
Preparing the machine for work
Proceed as follows before starting work:
-
Check that the batteries are fully charged, and
if not, carry out the recharging procedure: when
undertaking this operation, refer to the section
"Charging the batteries".
-
Make certain that the debris bin is empty and, if
not, empty it referring to the section "Emptying
.
! NOTICE
The operator seat can be adjusted for position, to
make the use of the machine more comfortable.
Working
reading the operating and maintenance manual.
! ATTENTION: avoid sweeping up pieces of wire, tape,
string and similar items that could become entangled
around the brushes.
! NOTICE
Releasing the accelerator pedal, all functions of
seconds (AUTO POWER-OFF). To reactivate the
functions, simply depress the accelerator pedal.
! NOTICE
disabled by way of the machine software menu; refer
! DANGER: Never sweep up combustible
petrol, fuel oil, etc.), acids and solvents (e.g.
paint thinners, acetone etc.) even if diluted.
-
Sit on the seat.
-
Turn the ignition key to switch the machine on.
-
Use the drive selector to select the drive direction.
-
To lower the centre brush, push the operating
lever forward:as the brush is lowered, the brush
motor and suction motor will come into operation.
! NOTICE
centre brush operating lever.
In the event that the centre brush should stop
working, press the button to reset the fuse.
EN
17
Publicidad
