Ivoclar Vivadent Programat EP 5010 G2 Instrucciones Breves página 8

3. User interface
The Programat EP 5010 G2 has a wide-screen colour display. The keypad and
the touch screen allow user-friendly handling. By tapping slightly with your
fingertips on the touch screen, the buttons are activated and the
furnace performs the requested function.
Keypad:
Home
Returning to Home screen (main menu)
Program key
Pressing once: The currently selected program is displayed.
Pressing twice: The program selection via number entry is
accessed.
Change operating mode key
By pressing this key, you can switch between the firing and the
press mode.
IRT key
With this key, the infrared image of the object can be displayed
during the closing process.
Power-saving key
This key activates the power-saving function.
8
Bitte EN
Open furnace head key
Close furnace head key
START key (Start LED)
Starts the selected program. The green LED indicates that a
program is running. If the program is paused (1 x STOP), the
Start LED flashes until renewed pressing of START results in the
program being resumed.
STOP key
A running program can be paused by pressing the STOP key
and terminated by pressing the key twice. Movement of the
furnace head can be stopped at any time by pressing STOP.
Acoustic signals can be turned off by pressing the STOP key.