JVC KW-NX7000 Manual De Instrucciones página 117

Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/LINE OUT)
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT terminal
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a
decoder compatible with these multi-channel sources to this terminal, and set <D. Audio Output> correctly.
(☞ page 106)
<D. Audio Output>
Playback disc
DVD 48 kHz, 16/20/24 bits Linear PCM
96 kHz, Linear PCM
with Dolby Digital
with DTS
with MPEG Audio
Audio CD, Video CD
Audio CD with DTS
with Dolby Digital
DivX/
MPEG
with MPEG Audio
MP3/WMA
WAV
AAC
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the
discs are not copy-protected.
Output signals
<Stream>
48 kHz, 16 bits stereo Linear PCM*
48 kHz, 16 bits stereo Linear PCM
Dolby Digital bitstream
DTS bitstream
MPEG bitstream
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
DTS bitstream
Dolby Digital bitstream
32/44.1/48 kHz, 16 bits Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits Linear PCM
44.1 / 48 kHz, 16 bits Linear PCM
117
<Dolby D>
48 kHz, 16 bits stereo
Linear PCM
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo
Linear PCM
AV OPERATIONS
<PCM>