Starting Guidance - JVC KW-NX7000 Manual De Instrucciones

Starting guidance

Setting a destination on the map
1
Touch the position where you want to select
☞
as a destination.
(
2
• If there are several POIs on the selected position,
select one from the list.
– The list appears only when <POI Icon> is set
to <On>. (☞ page 51)
After pressing [Select] on the map screen, you can do various
operations by pressing one of the buttons on the next screen.
Available buttons vary according to the type of the selected position
and the navigation status.
[Go]:
Starts guidance to a position. (☞ above)
[Replace]: Changes the destination to the selected position.
[Save]:
Saves a position as a favorite point. (☞ page 22)
[Edit]:
Edits the information of a position. (☞ page 23)
[Add]:
Adds a position to via points. (☞ page 43)
[Options]:
Modifies the route options. (☞ page 27)
page 20)
3
Distance and direction from your position
Information on the cursor-pointed position
• You can display the map of selected area on
whole screen by touching the map part once. (If
you press more than once, the map scrolls.) To
display above screen again, press [Select].
The System starts calculating the route to the
selected destination, and guidance starts.
25
Cancels the calculation
NAVIGATION SYSTEM