JVC KW-NX7000 Manual De Instrucciones página 52

Sistema de navegación/receptor dvd
Ocultar thumbs Ver también para KW-NX7000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Function Menu —Map Settings (continued)
Menu items
Vehicle Position
Clear User Memory
Restore Factory Settings
Reset Calibration Data
Access Navi SD
Startup Message*
Shutdown Message*
Traffic Service
1
*
Selectable only when at least one place is registered.
2
*
You cannot use Cyrillic characters for the message.
For entering the characters, ☞ page 28.
3
*
Selectable settings, [reference page]
If you find your current position displayed on a wrong place on the map,
use this setting to correct your position.
• To change your position, move the cursor to the position where you
want to set as current position and press [OK], then adjust the direction
by pressing [ ]/[ ] and press [OK].
: Initializes the list of your favorite points. ☞ [24]
1
Favorite*
: Initializes the list of previous destinations and via points. ☞
1
Previous*
[36]
: Initializes the registration of your home. ☞ [24]
1
Home*
Initializes all your settings.
• When you press [Restore], a confirmation message appears. Press [Yes]
to confirm the operation. Press [No] to cancel.
The Navigation System is gradually optimized by automatic calibration.
Reset the calibration data in the following cases:
• When you reinstall the unit in another car.
• When you replace or rotate the tires.
Once this is carried out, the calibration data is cleared.
• When you press [Reset], a confirmation message appears. Press [Yes]
to confirm the operation. Press [No] to cancel.
Select this to update your map database using an SD card.
• When you press [Open the Front Panel], the front panel opens. Press
[Cancel] to cancel the operation.
• For details about updating your unit, visit <http://www.jvc-exad.com>
(English website only).
2
Edit the voice message at startup/shutdown of the System.
• To edit the message, press [Edit], enter the message, then press [OK].
2
You can listen to the edited message by pressing [Test].*
Subscribe to traffic services. ☞ [47]
The procedure for setting an item is shown on page 16.
52
Initial:
Underlined
3

Publicidad

Tabla de contenido
loading

Tabla de contenido