Using The Bluetooth Cellular Phone - JVC KW-NX7000 Manual De Instrucciones

Using the Bluetooth cellular phone

Sound mode
(☞ page 102)
Status of the device
Signal strength/Battery
remainder (only when
the information comes
from the device)
1
* When a cellular phone with audio function is connected,
2
* This button appears when the Bluetooth Adapter is connected.
3
* This adjustment does not affect the volume level of the other sources.
~
Press [SOURCE], then press [BLUETOOTH PHONE].
• You can also use AV/OFF on the remote controller. Press it repeatedly.
Ÿ
Press .
[ ]
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu).
(☞ pages 110 and 111)
When a call comes in...
The source is changed to "Bluetooth PHONE"
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
(☞ page 111)
☞ page 86
Connected Device Name
*
Adjusts the volume of the incoming calls.*
5 ∞
[ ] Selects the registered device
("NEW DEVICE" appears when a new device can be registered.)
[ ] Hold: Activates <Voice Dialing> function
[ ] Displays <Dial Menu> screen.
2
3
appears.
(☞ page 58)
When <Auto Answer> is deactivated...
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
/ATT or VOL +/–).
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
/ATT or VOL +/–).
• You can adjust the microphone volume.
(☞ page 111)
84
1
*
Bluetooth icon lights
up when the adapter
is connected.