Publicidad
Idiomas disponibles
Idiomas disponibles
_- Description - rear panel
COMPONENT
________]
OUT I
VIDE00UT
I
DmG,TALOUT_ _
I [_
_
IS °vDE0
(PCN/BITSTREAM)
I _1
_
_
I
OUT
c0 xl l(hif
If h I @
2
3
4
5
1. DIGITAL OUT JACKS
Use either an optical or coaxial digital cable to connect to an AV amplifier with a builtqn decoder (AV control center).
2. 2ch AUDIO OUT JACKS
Connect to the Audio input jacks of A/V-compatible
TV or wide screen TV, Stereo system.
3. VIDEO OUT JACK
Use a video cable to connect one of the jacks to Video input on your A/V-compatible TV, wide screen TV, or Stereo system.
4. COMPONENT
VIDEO OUT JACKS
Use these jacks if you have a TV with Component Video in jacks. These jacks provide CdP,CdP_
and Y video. Along
with S-Video, Component Video provides the best picture quality.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your AN-compatible
TV or wide screen TV for a higher
quality picture.
Selecting
Progressive
Scan
(525p/480p
or Interlaced
525i/480i)
Playback
• If your TV is compatible with progressive
scanning (525p/480p),
connect the TV to the Component
Video jacks of the DVD
player and set "PROGRESSIVE"
to "ON" in the display setting.
Next, set your TV to the progressive
scan mode.
Refer to page 23 for instructions
on changing the display setting.
• If your TV is not compatible with progressive
scanning, set "PROGRESSIVE"
to "OFF".
• Use a commercially
available adaptor if the video input jacks of your TV or monitor is the BNC type.
What
is Progressive
Scanning?
• Unlike conventional
interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional
(525i/480i) television signals.
Manufactured
unde r license from Dolby Laboratoriesl "Dolby"
and the d0uble-D symbol are trademarks
of Dolby Laboratories.
iDTS" and "DTS Digital oUt" are trademarks of Digital Theater systems;InC:
- 12-
EN
Publicidad
