Publicidad
Idiomas disponibles
Idiomas disponibles
I Method 1 I
I Method 2]
I Method 3]
Basic
Good
Better
Best picture
Audio
picture
picture
COMPONENT
VIDEO
IN
R
L
VIDEO
IN
$-VIDEO
IN
©©
©
Cable
Cable
Cable
CableVide°
0_
!
AUDIO
OUT
@
@
S-Video Out
®
Analog
Video
Out
Audio
Out
VUDEO O UT
Component Video Out
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component
Video Jacks
NOTES:
• Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
• S-Video output connector
The video signals are divided into colour (C) and brightness
(Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting
it to the this product's S-Video output con-
nector using a commercially available S-Video connection cord.
HOW TO CONNECT
TO A TV WITHOUT
AUDIO/VIDEO
INPUT
JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV's 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video
RF Modulator, not includ-
ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked "TO TV") to the 75 ohm coaxial antenna termi-
nal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV's 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection,
remove that
cable from your TV's antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked "ANT IN"), then connect the RF modulator to your TV's antenna terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected
to the TV's antenna terminal
through an RF Modulator.
- 14-
EN
Publicidad
