INSPECTION DISPLAY AND AIR CONDITIONER NO. DISPLAY
Error code
Indoor unit No.
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÉS
ΕΛΛΗΝΙΚΑ
TÜRKÇE
êìëëäàâ
中 國 語
Inspection lamp
VRF series
outdoor unit No.
AIR CON No. button
When the inspection lamp (red) flashes
1. If any error occurs on the air conditioner, it stops. The red
inspection lamp starts to flash simultaneously.
Nos. of indoor and outdoor units on which the error has
occurred, and the error code are displayed.
NOTICE
Nos. of indoor and outdoor units are displayed on a VRF
series model. Indoor unit No. only is displayed on a Single
split series model.
2. Error display in case when more than one indoor units are
connected to a remote controller
When error occurs on all connected units, the air
conditioner stops and the display shows the error code
related to the air conditioner with the lowest No.
When the error occurs only on some of connected units,
only the air conditioners on which the error has occurred
stop. Display related to operating air conditioners is shown
on the remote controller.
If you need to check the error on other air conditioners,
press the air conditioner No. button so that the error code
are displayed one after another.
How to display the air conditioner No.
1. If you press the AIR CON No. button, Nos. of connected air
conditioners and the error code on the air conditioner
which has the error history are displayed.
– 5 –
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÉS
ΕΛΛΗΝΙΚΑ
TÜRKÇE
êìëëäàâ
中 國 語