Cautions For Use - Mitsubishi Heavy Industries RCH-E3 Manual Del Propietário

CAUTIONS FOR USE

NOTICE
• Functions available on the Simplified Remote Controller are limited compared with the standard remote controller.
• Simplified Remote Controller does not display the filter sign. It is necessary to clean the filter at regular intervals.
• Display range varies according to the connected indoor unit.
ENGLISH
FRANÇAIS
Following phenomena are normal.
DEUTSCH
The unit has started just by turning on the
ITALIANO
power switch.
ESPAÑOL
Button control is disabled.
NEDERLANDS
display is lit.
PORTUGUÉS
When operating the remote controller, the
ΕΛΛΗΝΙΚΑ
"CENTER" display flashes but the unit does
not operate.
TÜRKÇE
êìëëäàâ
中 國 語
BUTTON CONTROL DISABLE SETTING
NOTICE
The following buttons can be disabled. For the setting method, consult your dealer.
If a disabled button is pressed, the control disable display is shown for 3 seconds.
1ON/OFF button
2TEMP setting button
3Mode select button
4FAN SPEED button
When the power failure compensation is effective, the operation starts upon
restoration of power supply according to the setting selected before the
power failure or before the power switch was turned off.
If the button control disable setting is selected, the button control is disabled.
Check if the "CENTER" display is lit. When the unit is controlled with a central
control device, etc., the operation may not be controlled with the remote
controller.
Control disable display
– 6 –
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÉS
ΕΛΛΗΝΙΚΑ
TÜRKÇE
êìëëäàâ
中 國 語