Publicidad
Idiomas disponibles
Idiomas disponibles
HOWTOUSZ 35
Cycle
setting
buttons
SENSOR DRY cycles have preset settings that are selected
automatically.
MANUAL DRY cycles have default
settings, but you
may also customize
the settings using the cycle setting
buttons.
Press the button
for that option
to view and select other settings.
@ NOTE
To protectyour garments, not every dryness level, temperature,
or option is available with every cycle. See the Cycle Guide for
details.
•
Dry Level
Selects the level of dryness for the cycle. Press the Dry Level
button
repeatedly
to scroll through
available
settings.
,This option
is only available
with Sensor Dry cycles.
, The dryer will automatically
adjust the cycle time. Selecting
More Dry or Very Dry will increase the cycle time, while Less Dry
or Damp Dry will decrease the cycle time.
, Use a Less Dry or Damp Dry setting
for items that you wish to
iron.
Temp.
Control
Adjusts the temperature
setting
from Ultra Low to High. This
allows precise care of your fabrics and garments.
Press the TEMP.
CONTROL button
repeatedly
to scroll through
available
settings.
Your dryer features several additional
cycle options
to customize
cycles to meet your individual
needs. Certain
option
buttons
also
feature a special function
(see the following
page for details) that
can be activated
by pressing
and holding
that option
button
for 3
seconds.
To Add Cycle Options
to a Cycle:
1. Turn on the dryer and turn the cycle selector
knob to select the
desired cycle.
2. Use the cycle settings
buttons
to adjust the settings
for that
cycle.
3. Press the cycle option
button(s)
for the option you would
like to
add. A confirmation
message will be shown in the display.
4. Press the Start/Pause
button
to start the cycle. The dryer will
start automatically.
Wrinkle
Care
Selecting this option
will tumble
the load periodically
for up to
3 hours after the selected
cycle, or until the door is opened. This
is helpful
in preventing
wrinkles
when you are unable to remove
items from the dryer immediately.
Signal
Adjusts the volume
of the Signal or turns off the Signal.
Press the button
repeatedly
until the desired volume
setting
is
illuminated.
Time Dry
Allows you to manually
select the drying
time, from 20 to 60
minutes,
in 10-minute
increments.
Use this for small loads or to
remove wrinkles.
Use the More Time/Less Time buttons
to add or
reduce the drying
time in 1-minute
increments.
Publicidad
